dmesg - MSI NVIDIA GeForce GT 730

Return To MSI NVIDIA GeForce GT 730 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-105-generic (buildd@lgw01-59) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #152-Ubuntu SMP Fri Dec 2 15:37:11 UTC 2016 (Ubuntu 3.13.0-105.152-generic 3.13.11-ckt39)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000d7eeffff] usable
BIOS-e820: [mem 0x00000000d7ef0000-0x00000000d7ef2fff] ACPI NVS
BIOS-e820: [mem 0x00000000d7ef3000-0x00000000d7efffff] ACPI data
BIOS-e820: [mem 0x00000000e8000000-0x00000000e9ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000127ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. M720-US3/M720-US3, BIOS F4 06/18/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x128000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-CFFFF uncachable
  D0000-D7FFF write-back
  D8000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFC0000000 write-back
  2 base 00C0000000 mask FFF0000000 write-back
  3 base 00D0000000 mask FFF8000000 write-back
  4 base 0100000000 mask FFE0000000 write-back
  5 base 0120000000 mask FFF8000000 write-back
  6 disabled
  7 disabled
TOM2: 0000000128000000 aka 4736M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd8000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xd7ef0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4c90-0x000f4c9f] mapped at [ffff8800000f4c90]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x127e00000-0x127ffffff]
 [mem 0x127e00000-0x127ffffff] page 2M
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0x124000000-0x127dfffff]
 [mem 0x124000000-0x127dfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x123ffffff]
 [mem 0x100000000-0x123ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xd7eeffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xd7dfffff] page 2M
 [mem 0xd7e00000-0xd7eeffff] page 4k
RAMDISK: [mem 0x33e3c000-0x35f15fff]
ACPI: RSDP 00000000000f6670 000014 (v00 GBT   )
ACPI: RSDT 00000000d7ef3000 00003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: FACP 00000000d7ef3040 000074 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: DSDT 00000000d7ef30c0 007F78 (v01 GBT    NVDAACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000d7ef1900 000040
ACPI: SSDT 00000000d7efb100 00028A (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 00000000d7efb3c0 000038 (v01 GBT    NVDAACPI 42302E31 NVDA 00000098)
ACPI: MCFG 00000000d7efb400 00003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: TAMG 00000000d7efb440 00030A (v01 GBT    GBT   B0 4441312E VN?? 53450101)
ACPI: APIC 00000000d7efb040 00008E (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000127ffffff]
Initmem setup node 0 [mem 0x00000000-0x127ffffff]
  NODE_DATA [mem 0x127ff7000-0x127ffbfff]
 [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880123600000-ffff8801275fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x127ffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009dfff]
  node   0: [mem 0x00100000-0xd7eeffff]
  node   0: [mem 0x100000000-0x127ffffff]
On node 0 totalpages: 1048205
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13756 pages used for memmap
  DMA32 zone: 880368 pages, LIFO batch:31
  Normal zone: 2560 pages used for memmap
  Normal zone: 163840 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xd7ef0000-0xd7ef2fff]
PM: Registered nosave memory: [mem 0xd7ef3000-0xd7efffff]
PM: Registered nosave memory: [mem 0xd7f00000-0xe7ffffff]
PM: Registered nosave memory: [mem 0xe8000000-0xe9ffffff]
PM: Registered nosave memory: [mem 0xea000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xea000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff880127c00000 s81536 r8192 d20864 u524288
pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031804
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ cc000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ cc000000
PM: Registered nosave memory: [mem 0xcc000000-0xcfffffff]
Memory: 3944964K/4192820K available (7431K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 247856K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2500.105 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.21 BogoMIPS (lpj=10000420)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00d7f00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28670 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (fam: 0f, model: 6b, stepping: 01)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10000.28 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xd7ef0000-0xd7ef2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:19:33, date: 12/15/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, fffff]
TOM: 00000000d8000000 aka 3456M
node 0 link 0: mmio [e8000000, e9ffffff]
node 0 link 0: mmio [ea000000, ffb7ffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d8000000, e7ffffff]
TOM2: 0000000128000000 aka 4736M
bus: [bus 00-0f] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0xd8000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x128000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe8000000-0xe9ffffff] (base 0xe8000000)
PCI: MMCONFIG at [mem 0xe8000000-0xe9ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x9A, should be 0x99 (20131115/tbprint-214)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd8000000-0xfebfffff]
pci 0000:00:00.0: [10de:0754] type 00 class 0x050000
pci 0000:00:01.0: [10de:075c] type 00 class 0x060100
pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io  0xc000-0xc03f]
pci 0000:00:01.1: reg 0x20: [io  0x1c00-0x1c3f]
pci 0000:00:01.1: reg 0x24: [io  0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.2: [10de:0751] type 00 class 0x050000
pci 0000:00:01.4: [10de:0568] type 00 class 0x050000
pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xee20a000-0xee20afff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xee20b000-0xee20b0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310
pci 0000:00:04.0: reg 0x10: [mem 0xee20c000-0xee20cfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320
pci 0000:00:04.1: reg 0x10: [mem 0xee209000-0xee2090ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: System wakeup disabled by ACPI
pci 0000:00:06.0: [10de:0759] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:07.0: [10de:0774] type 00 class 0x040300
pci 0000:00:07.0: reg 0x10: [mem 0xee200000-0xee203fff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:075a] type 01 class 0x060401
pci 0000:00:08.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [10de:0ad4] type 00 class 0x010601
pci 0000:00:09.0: reg 0x10: [io  0x09f0-0x09f7]
pci 0000:00:09.0: reg 0x14: [io  0x0bf0-0x0bf3]
pci 0000:00:09.0: reg 0x18: [io  0x0970-0x0977]
pci 0000:00:09.0: reg 0x1c: [io  0x0b70-0x0b73]
pci 0000:00:09.0: reg 0x20: [io  0xd400-0xd40f]
pci 0000:00:09.0: reg 0x24: [mem 0xee204000-0xee205fff]
pci 0000:00:10.0: [10de:0778] type 01 class 0x060400
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [10de:077a] type 01 class 0x060400
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:01:07.0: [13d0:2103] type 00 class 0x028000
pci 0000:01:07.0: reg 0x10: [mem 0xee000000-0xee00ffff]
pci 0000:01:07.0: reg 0x14: [io  0x9000-0x901f]
pci 0000:01:09.0: [1106:3038] type 00 class 0x0c0300
pci 0000:01:09.0: reg 0x20: [io  0x9400-0x941f]
pci 0000:01:09.0: supports D1 D2
pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:09.2: [1106:3104] type 00 class 0x0c0320
pci 0000:01:09.2: reg 0x10: [mem 0xee015000-0xee0150ff]
pci 0000:01:09.2: supports D1 D2
pci 0000:01:09.2: PME# supported from D0 D1 D2 D3hot
pci 0000:01:0e.0: [104c:8024] type 00 class 0x0c0010
pci 0000:01:0e.0: reg 0x10: [mem 0xee014000-0xee0147ff]
pci 0000:01:0e.0: reg 0x14: [mem 0xee010000-0xee013fff]
pci 0000:01:0e.0: supports D1 D2
pci 0000:01:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:08.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:08.0:   bridge window [mem 0xee000000-0xee0fffff]
pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:08.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:08.0:   bridge window [mem 0xd8000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [10de:1287] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xea000000-0xeaffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io  0xa000-0xa07f]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xec000000-0xec003fff]
pci 0000:00:10.0: PCI bridge to [bus 02]
pci 0000:00:10.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:10.0:   bridge window [mem 0xea000000-0xecffffff]
pci 0000:00:10.0:   bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io  0xb000-0xb0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xee110000-0xee110fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xee100000-0xee10ffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: PCI bridge to [bus 03]
pci 0000:00:14.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.0:   bridge window [mem 0xed000000-0xedffffff]
pci 0000:00:14.0:   bridge window [mem 0xee100000-0xee1fffff 64bit pref]
ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LE0A] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0
ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0
ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0
ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:02:00.0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xd7ef0000-0xd7ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x1000-0x107f] has been reserved
system 00:00: [io  0x1080-0x10ff] has been reserved
system 00:00: [io  0x1400-0x147f] has been reserved
system 00:00: [io  0x1480-0x14ff] has been reserved
system 00:00: [io  0x1800-0x187f] has been reserved
system 00:00: [io  0x1880-0x18ff] has been reserved
system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0xe8000000-0xe9ffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:09: [mem 0x000daa00-0x000dbfff] has been reserved
system 00:09: [mem 0x000f0000-0x000fbfff] could not be reserved
system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:09: [mem 0xd7ef0000-0xd7efffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xd7eeffff] could not be reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:08.0: PCI bridge to [bus 01]
pci 0000:00:08.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:08.0:   bridge window [mem 0xee000000-0xee0fffff]
pci 0000:02:00.0: BAR 6: assigned [mem 0xe2000000-0xe207ffff pref]
pci 0000:00:10.0: PCI bridge to [bus 02]
pci 0000:00:10.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:10.0:   bridge window [mem 0xea000000-0xecffffff]
pci 0000:00:10.0:   bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xee120000-0xee12ffff pref]
pci 0000:00:14.0: PCI bridge to [bus 03]
pci 0000:00:14.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:14.0:   bridge window [mem 0xed000000-0xedffffff]
pci 0000:00:14.0:   bridge window [mem 0xee100000-0xee1fffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd8000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xee000000-0xee0fffff]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0xd8000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xea000000-0xecffffff]
pci_bus 0000:02: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xed000000-0xedffffff]
pci_bus 0000:03: resource 2 [mem 0xee100000-0xee1fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 21
ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
pci 0000:02:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 33640K (ffff880033e3c000 - ffff880035f16000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ cc000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
microcode: AMD CPU family 0xf not supported
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1481800774.032:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7899
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90002780000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 32 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xee20b000
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-105-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:04.1: EHCI Host Controller
ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:04.1: debug port 1
ehci-pci 0000:00:04.1: cache line size of 32 is not supported
ehci-pci 0000:00:04.1: irq 20, io mem 0xee209000
ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-105-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:04.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-pci 0000:01:09.2: EHCI Host Controller
ehci-pci 0000:01:09.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:01:09.2: irq 17, io mem 0xee015000
ehci-pci 0000:01:09.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-105-generic ehci_hcd
usb usb3: SerialNumber: 0000:01:09.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:02.0: irq 23, io mem 0xee20a000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-105-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:02.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ohci-pci 0000:00:04.0: OHCI PCI host controller
ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:04.0: irq 21, io mem 0xee20c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-105-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:04.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 6 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:09.0: UHCI Host Controller
uhci_hcd 0000:01:09.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:01:09.0: irq 19, io base 0x00009400
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-105-generic uhci_hcd
usb usb6: SerialNumber: 0000:01:09.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 8eeaf272b7f19bc6babadc11377145eb86fc1dbb'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 12:600:327
rtc_cmos 00:04: setting system clock to 2016-12-15 11:19:34 UTC (1481800774)
powernow-k8: fid 0x11 (2500 MHz), vid 0x9
powernow-k8: fid 0x10 (2400 MHz), vid 0xa
powernow-k8: fid 0xe (2200 MHz), vid 0xc
powernow-k8: fid 0xc (2000 MHz), vid 0xe
powernow-k8: fid 0xa (1800 MHz), vid 0x10
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ (2 cpu cores) (version 2.20.00)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 748K (ffff880001745000 - ffff880001800000)
Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000)
systemd-udevd[106]: starting version 204
pata_amd 0000:00:06.0: version 0.4.1
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
ahci 0000:00:09.0: irq 40 for MSI/MSI-X
ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh 
[drm] Initialized drm 1.1.0 20060810
r8169 0000:03:00.0: irq 41 for MSI/MSI-X
r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc9000273c000, 00:24:1d:a2:fa:b0, XID 1c4000c0 IRQ 41
r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
firewire_ohci 0000:01:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
scsi7 : ahci
ata3: SATA max UDMA/133 abar m8192@0xee204000 port 0xee204100 irq 40
ata4: SATA max UDMA/133 abar m8192@0xee204000 port 0xee204180 irq 40
ata5: SATA max UDMA/133 abar m8192@0xee204000 port 0xee204200 irq 40
ata6: SATA max UDMA/133 abar m8192@0xee204000 port 0xee204280 irq 40
ata7: SATA max UDMA/133 abar m8192@0xee204000 port 0xee204300 irq 40
ata8: SATA max UDMA/133 abar m8192@0xee204000 port 0xee204380 irq 40
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or  required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
nvidia-nvlink: Nvlink Core is being initialized, major device number 250
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.20  Tue Nov 15 16:49:10 PST 2016 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  375.20  Tue Nov 15 16:43:27 PST 2016
[drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
ata1.00: configured for UDMA/66
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata2: port disabled--ignoring
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: ATA-9: ST1000DM003-1ER162, CC43, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: configured for UDMA/133
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: ATA-8: WDC WD5000AADS-00L4B1, 05.04C05, max UDMA/133
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: ATA-9: ST3000DM001-1CH166, CC27, max UDMA/133
ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata8: SATA link down (SStatus 0 SControl 300)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access     ATA      ST1000DM003-1ER1 CC43 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 05.0 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:0: Direct-Access     ATA      ST3000DM001-1CH1 CC27 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: unknown partition table
sd 3:0:0:0: [sdb] Attached SCSI disk
 sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
 sdd: sdd1 sdd3
sd 5:0:0:0: [sdd] Attached SCSI disk
 sdc: sdc1 sdc2 < sdc5 >
sd 4:0:0:0: [sdc] Attached SCSI disk
firewire_core 0000:01:0e.0: created device fw0: GUID 006e581c00001d7d, S400
usb 3-1: new high-speed USB device number 2 using ehci-pci
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1: New USB device found, idVendor=2040, idProduct=8400
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: WinTV Nova-DT
usb 3-1: Manufacturer: Hauppauge
usb 3-1: SerialNumber: 4032966298
random: nonblocking pool is initialized
usb 5-1: new low-speed USB device number 2 using ohci-pci
usb 5-1: New USB device found, idVendor=1c4f, idProduct=0002
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Keyboard
usb 5-1: Manufacturer: SIGMACHIP
usb 4-1: new full-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=0b48, idProduct=1005
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: WinTV NOVA-t USB
usb 4-1: Manufacturer: Hauppauge
usb 4-2: new full-speed USB device number 3 using ohci-pci
usb 4-2: New USB device found, idVendor=0471, idProduct=0815
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: eHome Infrared Transceiver
usb 4-2: Manufacturer: Philips
usb 4-2: SerialNumber: PH00c7s2
usb 4-3: new full-speed USB device number 4 using ohci-pci
usb 4-3: New USB device found, idVendor=28de, idProduct=1142
usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-3: Product: Steam Controller
usb 4-3: Manufacturer: Valve Software
Adding 1036188k swap on /dev/sdc5.  Priority:-1 extents:1 across:1036188k FS
systemd-udevd[323]: starting version 204
EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null)
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c40
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
hda_intel: Disabling MSI
hda_intel: position_fix set to 1 for device 1458:a022
hda-intel 0000:00:07.0: Disabling 64bit DMA
hda-intel 0000:00:07.0: Enable delay in RIRB handling
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
DVB: registering new adapter (FlexCop Digital TV device)
b2c2-flexcop: MAC address = 00:d0:d7:12:3e:59
CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
CX24123: wrong demod revision: 87
hidraw: raw HID events driver (C) Jiri Kosina
SKU: Nid=0x0 sku_cfg=0x0000e601
SKU: port_connectivity=0x0
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
b2c2-flexcop: found 'ST STV0299 DVB-S' .
b2c2_flexcop_pci 0000:01:07.0: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x1e/0x0
   inputs:
     Rear Mic=0x18
     Front Mic=0x19
     Line=0x1a
     CD=0x1c
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0888
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Registered IR keymap rc-rc6-mce
input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:02.0/usb4/4-2/4-2:1.0/rc/rc0/input5
rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:02.0/usb4/4-2/4-2:1.0/rc/rc0
IR RC5(x) protocol handler initialized
IR NEC protocol handler initialized
IR SANYO protocol handler initialized
IR RC6 protocol handler initialized
IR Sony protocol handler initialized
IR JVC protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 248 
rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
IR LIRC bridge handler initialized
MCE: In-kernel MCE decoding enabled.
input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input6
IR MCE Keyboard/mouse protocol handler initialized
mceusb 4-2:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
mceusb 4-2:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1 active)
usbcore: registered new interface driver mceusb
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb5/5-1/5-1:1.0/input/input7
hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:04.0-1/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb5/5-1/5-1:1.1/input/input8
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:04.0-1/input1
input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:02.0/usb4/4-3/4-3:1.0/input/input9
hid-generic 0003:28DE:1142.0003: input,hidraw2: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:02.0-3/input0
dib0700: firmware started successfully.
hid-generic 0003:28DE:1142.0004: hiddev0,hidraw3: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:02.0-3/input1
hid-generic 0003:28DE:1142.0005: hiddev0,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:02.0-3/input2
hid-generic 0003:28DE:1142.0006: hiddev0,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:02.0-3/input3
hid-generic 0003:28DE:1142.0007: hiddev0,hidraw6: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:02.0-3/input4
kvm: disabled by bios
kvm: disabled by bios
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input17
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:07.0/sound/card0/input16
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input15
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
 (Note that use of the override may cause unknown side effects.)
ACPI: PCI Interrupt Link [AE0B] enabled at IRQ 16
hda_intel: Disabling MSI
hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:02:00.1: Disabling 64bit DMA
hda-intel 0000:02:00.1: Enable delay in RIRB handling
dvb-usb: found a 'Hauppauge Nova-TD-500 (84xxx)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-TD-500 (84xxx))
type=1400 audit(1481800790.578:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=568 comm="apparmor_parser"
type=1400 audit(1481800790.578:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=568 comm="apparmor_parser"
type=1400 audit(1481800790.578:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=568 comm="apparmor_parser"
type=1400 audit(1481800790.578:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=518 comm="apparmor_parser"
type=1400 audit(1481800790.578:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=518 comm="apparmor_parser"
type=1400 audit(1481800790.578:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=518 comm="apparmor_parser"
type=1400 audit(1481800790.578:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=568 comm="apparmor_parser"
type=1400 audit(1481800790.578:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=568 comm="apparmor_parser"
type=1400 audit(1481800790.578:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=518 comm="apparmor_parser"
type=1400 audit(1481800790.578:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=518 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:10.0/0000:02:00.1/sound/card1/input18
usb 3-1: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-TD-500 (84xxx))
ttusb_init_controller: dsp-version: 0.0
DVB: registering new adapter (Technotrend/Hauppauge Nova-USB)
usb 3-1: DVB: registering adapter 2 frontend 0 (DiBcom 7000PC)...
usb 4-1: DVB: registering adapter 3 frontend 0 (Philips TDA10046H DVB-T)...
usbcore: registered new interface driver ttusb
DiB0070: successfully identified
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:08.0/0000:01:09.2/usb3/3-1/rc/rc1/input20
rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:08.0/0000:01:09.2/usb3/3-1/rc/rc1
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Hauppauge Nova-TD-500 (84xxx) successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
init: failsafe main process (634) killed by TERM signal
init: avahi-cups-reload main process (847) terminated with status 1
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
audit_printk_skb: 12 callbacks suppressed
type=1400 audit(1481800795.918:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=867 comm="apparmor_parser"
type=1400 audit(1481800795.918:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=867 comm="apparmor_parser"
type=1400 audit(1481800795.918:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
type=1400 audit(1481800795.922:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=867 comm="apparmor_parser"
type=1400 audit(1481800795.922:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
type=1400 audit(1481800795.922:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=867 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1481800797.102:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=868 comm="apparmor_parser"
type=1400 audit(1481800797.102:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=868 comm="apparmor_parser"
type=1400 audit(1481800797.102:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=868 comm="apparmor_parser"
type=1400 audit(1481800797.102:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=868 comm="apparmor_parser"
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
audit_printk_skb: 114 callbacks suppressed
type=1400 audit(1481800802.022:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/mysqld" pid=1173 comm="apparmor_parser"
init: gdm main process (1138) killed by TERM signal
init: samba-ad-dc main process (985) terminated with status 1
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
nvidia 0000:02:00.0: irq 42 for MSI/MSI-X
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-e09d9c56-9758-63f9-a1cf-d2207ea6baf7) @ PCI:0000:02:00.0
HDMI: invalid ELD data byte 31
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1940) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: supports DRM functions and may not be fully accessible
ata4.00: configured for UDMA/133
ata4: EH complete
ata6.00: configured for UDMA/133
ata6: EH complete
ata5.00: configured for UDMA/133
ata5: EH complete
perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

Return To MSI NVIDIA GeForce GT 730 System Information